Do I need a permit to build a fence in Cedar Park, TX?

Yes — Cedar Park, TX requires a written application, a plot plan showing where the fence will sit on your property, and a sketch of the fence design.

How tall can my fence be in Cedar Park, TX?

Up to 8′ in the rear yard, 3′ in front of the building line.

How much does a Cedar Park, TX fence permit cost?

Cedar Park, TX does not publish a flat fence permit fee — it is set by resolution or scales with the value of the work. Confirm the current amount with the building department.

What does a fence plot plan need to show?

Your property outline, location of the proposed fence, total linear feet, height, material, distance from any street/sidewalk, and (in most cities) the location of your house. Fence Plotter generates this automatically from a satellite image and your fence drawing.

Can I draw my plot plan myself?

Yes — most building departments accept owner-drawn plot plans as long as they're clear, dimensioned, and to scale. Fence Plotter produces a permit-ready plot plan + elevation sketch in two minutes.

Cedar Park, TX fence permit

Plan your fence on a satellite map of your Cedar Park, TX property and get a permit-ready PDF in 2 minutes. Free, no sign-up.

Plan my fence →

What you'll get for Cedar Park, TX

✓ Satellite plot plan — top-down map of your property with the fence drawn on it, every side dimensioned.
✓ Fence elevation — side view showing height, panel count, and gates.
✓ Real lot lines — pulled from county GIS so your fence sits on the actual property boundary.
○ Filled Cedar Park, TX permit form— pending. Until then you get the universal plot plan + a checklist of what to handwrite on the city's form.
✓ Cedar Park, TX ordinance check — height limits, setbacks, and neighbor-consent rules specific to Cedar Park, TX.

Cedar Park, TX fence rules

Max height (rear yard): 8′
Max height (front of building line): 3′

Only a fence 3' or less is allowed in the front setback. A 6' fence is allowed there only if the lot is larger than 20,000 square feet AND the fence is wrought iron or similar material.
In the rear and side setback a fence may not exceed 8' and must be wood, wrought iron, masonry or similar material, permanently affixed to the ground.
A privacy fence enclosing the rear yard is required on new single-family detached homes, including patio homes.
Nothing more than thirty percent (30%) solid or more than 3' tall may sit where it impairs the sight distance triangle at the intersection of any rights-of-way, and no fence may impede drainage.
Height is measured from the natural grade where the fence post is set to the highest edge of the post. A fence along a public right-of-way must face its finished edge toward the right-of-way, and must be installed at the same height as fencing on adjacent common property lines unless that would break the limits above.
Barbed wire, razor wire, electrified fences and fences topped with barbed or razor wire are prohibited, except to enclose livestock in RA districts or on a property with an agricultural exemption. Fences of paper, cloth, canvas or similar highly flammable material are prohibited outright.

Source: https://ecode360.com/38625264

Start drawing my fence →

FAQ

Do I need a permit to build a fence in Cedar Park, TX?: Yes — Cedar Park, TX requires a written application, a plot plan showing where the fence will sit on your property, and a sketch of the fence design.
How tall can my fence be in Cedar Park, TX?: Up to 8′ in the rear yard, 3′ in front of the building line.
How much does a Cedar Park, TX fence permit cost?: Cedar Park, TX does not publish a flat fence permit fee — it is set by resolution or scales with the value of the work. Confirm the current amount with the building department.
What does a fence plot plan need to show?: Your property outline, location of the proposed fence, total linear feet, height, material, distance from any street/sidewalk, and (in most cities) the location of your house. Fence Plotter generates this automatically from a satellite image and your fence drawing.
Can I draw my plot plan myself?: Yes — most building departments accept owner-drawn plot plans as long as they're clear, dimensioned, and to scale. Fence Plotter produces a permit-ready plot plan + elevation sketch in two minutes.

Not sure what Cedar Park means by “site plan”? See the nine things a plan reviewer checks — the same list whatever city you are applying in.

Do I need a survey?·Why permits get rejected

Fence Plotter is informational only. Always confirm specific requirements with the Cedar Park, TX building department before submitting.

Ready to draw your fence? Free · 2 minutes · no sign-up

Plan a fence in Cedar Park →

Cedar Park, TX fence permit

What you'll get for Cedar Park, TX

Cedar Park, TX fence rules

FAQ

Other supported cities