How tall can my fence be in Issaquah, WA?

Issaquah, WA does not set a single height cap — the limit depends on the yard, the zoning district, and how the fence is built. The fence rules above quote the ordinance.

How much does a Issaquah, WA fence permit cost?

We have Issaquah, WA's fence ordinance on file but not a permit fee, so we do not publish an amount for it. Ask the building department what a fence permit costs before you apply.

What does a fence plot plan need to show?

Your property outline, location of the proposed fence, total linear feet, height, material, distance from any street/sidewalk, and (in most cities) the location of your house. Fence Plotter generates this automatically from a satellite image and your fence drawing.

Can I draw my plot plan myself?

Yes — most building departments accept owner-drawn plot plans as long as they're clear, dimensioned, and to scale. Fence Plotter produces a permit-ready plot plan + elevation sketch in two minutes.

Issaquah, WA fence permit site plan

Plan your fence on a satellite map of your Issaquah, WA property and get a permit-ready PDF in 2 minutes. Free, no sign-up.

If Issaquah's form asks for a site plan and this page says plot plan, they are the same drawing for a fence application: a to-scale overhead view of your lot with the property lines, the existing structures and the proposed fence dimensioned on it. A surveyed site plan is the one genuinely different document, and only a licensed surveyor can seal one. What a fence permit site plan has to show.

Plan my fence →

What you'll get for Issaquah, WA

✓ Satellite site plan — top-down map of your property with the fence drawn on it, every side dimensioned.
✓ Fence elevation — side view showing height, panel count, and gates.
✓ Real lot lines — pulled from county GIS so your fence sits on the actual property boundary.
○ Filled Issaquah, WA permit form — pending. Until then you get the universal plot plan + a checklist of what to handwrite on the city's form.
✓ Issaquah, WA ordinance check — height limits, setbacks, and neighbor-consent rules specific to Issaquah, WA.

Issaquah, WA fence rules

A residential fence needs a building permit only if it sits in a critical area or stands more than 6′ tall. That is a permit threshold, not a height limit.
In the Single-Family – Duplex (SF-D) zone, the maximum fence height in the front setback is 4′. That standard sits in the Olde Town chapter, which applies only to the Olde Town subarea, so confirm with the Permit Center before building.
Chain-link may not be used on single-family, duplex, triplex, fourplex, or townhome lots unless the area's architectural standards or an active Architectural Review Committee allow it, such as Olde Town, Issaquah Highlands, or Talus.
Electric fences are not permitted in any district except where additional fencing or other barriers prevent access by small children. Barbed wire is allowed only atop a six-foot solid or chain-link fence in commercial or industrial districts, to contain permitted agricultural animals, or around a utility facility.
Where the SF-D standards apply, a fence must leave the dwelling's prominent entry visible from the street.
Where the SF-D standards apply, a privacy fence may stand in front of or near recessed portions of the street-facing facade, as long as it does not block a portion of the building and the entire front entry feature.

Do you need a permit? Usually no. The city's own Decks and Fences page, published by Community Planning and Development, says residential fences do not require a building permit unless the fence sits in a critical area or stands more than 6 feet in height. That page is explicit that work needing no permit must still meet the city's land use regulations, so the front-setback standard in the bullets above applies whether a permit is pulled or not. (source)

Source: https://www.issaquahwa.gov/182/Decks-Fences

Start drawing my fence →

FAQ

Do I need a permit to build a fence in Issaquah, WA?: Usually no. The city's own Decks and Fences page, published by Community Planning and Development, says residential fences do not require a building permit unless the fence sits in a critical area or stands more than 6 feet in height. That page is explicit that work needing no permit must still meet the city's land use regulations, so the front-setback standard in the bullets above applies whether a permit is pulled or not.
How tall can my fence be in Issaquah, WA?: Issaquah, WA does not set a single height cap — the limit depends on the yard, the zoning district, and how the fence is built. The fence rules above quote the ordinance.
How much does a Issaquah, WA fence permit cost?: We have Issaquah, WA's fence ordinance on file but not a permit fee, so we do not publish an amount for it. Ask the building department what a fence permit costs before you apply.
What does a fence plot plan need to show?: Your property outline, location of the proposed fence, total linear feet, height, material, distance from any street/sidewalk, and (in most cities) the location of your house. Fence Plotter generates this automatically from a satellite image and your fence drawing.
Can I draw my plot plan myself?: Yes — most building departments accept owner-drawn plot plans as long as they're clear, dimensioned, and to scale. Fence Plotter produces a permit-ready plot plan + elevation sketch in two minutes.

Not sure what Issaquah means by “site plan”? See the nine things a plan reviewer checks — the same list whatever city you are applying in.

Do I need a survey?·Free template — which kind?·Do I need a permit?·Why permits get rejected

Fence Plotter is informational only. Always confirm specific requirements with the Issaquah, WA building department before submitting.

Ready to draw your fence? Free · 2 minutes · no sign-up

Plan a fence in Issaquah →

Issaquah, WA fence permit site plan

What you'll get for Issaquah, WA

Issaquah, WA fence rules

FAQ

Other supported cities