How much does a Safety Harbor, FL fence permit cost?

Safety Harbor, FL charges $90 for a fence permit at the time of issuance.

What does a fence plot plan need to show?

Your property outline, location of the proposed fence, total linear feet, height, material, distance from any street/sidewalk, and (in most cities) the location of your house. Fence Plotter generates this automatically from a satellite image and your fence drawing.

Can I draw my plot plan myself?

Yes — most building departments accept owner-drawn plot plans as long as they're clear, dimensioned, and to scale. Fence Plotter produces a permit-ready plot plan + elevation sketch in two minutes.

Safety Harbor, FL fence permit site plan

Plan your fence on a satellite map of your Safety Harbor, FL property and get a permit-ready PDF in 2 minutes. Free, no sign-up.

If Safety Harbor's form asks for a site plan and this page says plot plan, they are the same drawing for a fence application: a to-scale overhead view of your lot with the property lines, the existing structures and the proposed fence dimensioned on it. A surveyed site plan is the one genuinely different document, and only a licensed surveyor can seal one. What a fence permit site plan has to show.

Plan my fence →

What you'll get for Safety Harbor, FL

✓ Satellite site plan — top-down map of your property with the fence drawn on it, every side dimensioned.
✓ Fence elevation — side view showing height, panel count, and gates.
✓ Real lot lines — pulled from county GIS so your fence sits on the actual property boundary.
○ Filled Safety Harbor, FL permit form — pending. Until then you get the universal plot plan + a checklist of what to handwrite on the city's form.
✓ Safety Harbor, FL ordinance check — height limits, setbacks, and neighbor-consent rules specific to Safety Harbor, FL.

Safety Harbor, FL fence rules

Max height (rear yard): 6'
Permit fee: $90 (source)

A City land development review is required for a fence, and the review fee is $90. Building permit fees may apply on top of it.
Front yards are capped at 4'. In the E-1 Estate Residential District a front-yard fence, wall, or hedge may reach 5' as long as anything over 4' is not chain-link or wood, and lots fronting a designated collector or arterial road may go to 6' except in the Community Redevelopment District.
On a corner lot, the front yard is the side the property is addressed from; the other street-facing side is a secondary front yard where the maximum height is 6'.
Fences and walls, including retaining walls, must be set back at least 2' from a platted alleyway or the edge of a sidewalk. Vehicular gates on driveways must be set back at least 20' from the roadway and must not block the sidewalk when open.
Chain-link is prohibited in a required primary or secondary front yard on residentially zoned property, and the finished side of a fence must face outward toward abutting lots and the right-of-way.
All fences, walls, and hedges must also meet the Code's visibility triangle requirements.

Do you need a permit? Yes, for any fence. The city's Permits page lists Fences under Required Permits, among the work that requires a permit, and names no height below which one is skipped. The Building Department's Fence/Wall Permit Completeness Form adds that all fences are subject to final inspection, and that a masonry wall or a wall with columns is a city-county permit which begins with a city review and is then submitted to Pinellas County for consistency with the Florida Building Code. (source)

Source: https://library.municode.com/fl/safety_harbor/codes/land_development_code?nodeId=ARTIIISUDIRE_36.00ACUSST

Start drawing my fence →

FAQ

Do I need a permit to build a fence in Safety Harbor, FL?: Yes, for any fence. The city's Permits page lists Fences under Required Permits, among the work that requires a permit, and names no height below which one is skipped. The Building Department's Fence/Wall Permit Completeness Form adds that all fences are subject to final inspection, and that a masonry wall or a wall with columns is a city-county permit which begins with a city review and is then submitted to Pinellas County for consistency with the Florida Building Code.
How tall can my fence be in Safety Harbor, FL?: Up to 6' in the rear yard.
How much does a Safety Harbor, FL fence permit cost?: Safety Harbor, FL charges $90 for a fence permit at the time of issuance.
What does a fence plot plan need to show?: Your property outline, location of the proposed fence, total linear feet, height, material, distance from any street/sidewalk, and (in most cities) the location of your house. Fence Plotter generates this automatically from a satellite image and your fence drawing.
Can I draw my plot plan myself?: Yes — most building departments accept owner-drawn plot plans as long as they're clear, dimensioned, and to scale. Fence Plotter produces a permit-ready plot plan + elevation sketch in two minutes.

Not sure what Safety Harbor means by “site plan”? See the nine things a plan reviewer checks — the same list whatever city you are applying in.

Do I need a survey?·Free template — which kind?·Do I need a permit?·Why permits get rejected

Fence Plotter is informational only. Always confirm specific requirements with the Safety Harbor, FL building department before submitting.

Ready to draw your fence? Free · 2 minutes · no sign-up

Plan a fence in Safety Harbor →

Safety Harbor, FL fence permit site plan

What you'll get for Safety Harbor, FL

Safety Harbor, FL fence rules

FAQ

Other supported cities