How much does a Queen Creek, AZ fence permit cost?

We have Queen Creek, AZ's fence ordinance on file but not a permit fee, so we do not publish an amount for it. Ask the building department what a fence permit costs before you apply.

What does a fence plot plan need to show?

Your property outline, location of the proposed fence, total linear feet, height, material, distance from any street/sidewalk, and (in most cities) the location of your house. Fence Plotter generates this automatically from a satellite image and your fence drawing.

Can I draw my plot plan myself?

Yes — most building departments accept owner-drawn plot plans as long as they're clear, dimensioned, and to scale. Fence Plotter produces a permit-ready plot plan + elevation sketch in two minutes.

Queen Creek, AZ fence permit site plan

Plan your fence on a satellite map of your Queen Creek, AZ property and get a permit-ready PDF in 2 minutes. Free, no sign-up.

If Queen Creek's form asks for a site plan and this page says plot plan, they are the same drawing for a fence application: a to-scale overhead view of your lot with the property lines, the existing structures and the proposed fence dimensioned on it. A surveyed site plan is the one genuinely different document, and only a licensed surveyor can seal one. What a fence permit site plan has to show.

Plan my fence →

What you'll get for Queen Creek, AZ

✓ Satellite site plan — top-down map of your property with the fence drawn on it, every side dimensioned.
✓ Fence elevation — side view showing height, panel count, and gates.
✓ Real lot lines — pulled from county GIS so your fence sits on the actual property boundary.
○ Filled Queen Creek, AZ permit form — pending. Until then you get the universal plot plan + a checklist of what to handwrite on the city's form.
✓ Queen Creek, AZ ordinance check — height limits, setbacks, and neighbor-consent rules specific to Queen Creek, AZ.

Queen Creek, AZ fence rules

Max height (rear yard): 6'

A fence permit must be issued by the Planning Administrator before you build, unless the lot already requires a building permit.
Front-yard fences are limited to 3', or 4' if everything above 3' is an open material such as wrought iron or vinyl rail. On parcels zoned R1-43 and larger they may reach 6', provided no solid portion exceeds 3' and the fence stands at least 8' back from the front property line.
A fence on a side or rear property line may not exceed 6' measured from the highest finished grade beside it, and never more than 8' from the lowest adjacent grade; any portion above 6' on the low side must be view fencing.
On a corner lot abutting a key lot, a fence or freestanding wall over 3'6" but not more than 6' must be set back from the street-side property line at least half the depth of the required front yard.
Barbed wire and chain link are prohibited in every zoning district. Metal wire mesh is also prohibited except in the rural districts and R1-35.
Any fence above 6' must be designed by an Arizona registered structural engineer and approved by the Town.

Do you need a permit? Yes. The Town's "When is a Permit Required?" page lists fences and walls among the work permits are required for, and states no height exemption for them, noting only that the list is not all inclusive. The Town's companion Fencing Requirements page sets out what to bring: a completed Construction Permit application, a site plan showing boundary lines with all existing structures and fencing and the proposed new fencing, and a detail of the design and materials using either one of the Town's approved standard fence details or engineered drawings. (source)

Source: https://www.queencreekaz.gov/home/showpublisheddocument/40938/639147840971500000

Start drawing my fence →

FAQ

Do I need a permit to build a fence in Queen Creek, AZ?: Yes. The Town's "When is a Permit Required?" page lists fences and walls among the work permits are required for, and states no height exemption for them, noting only that the list is not all inclusive. The Town's companion Fencing Requirements page sets out what to bring: a completed Construction Permit application, a site plan showing boundary lines with all existing structures and fencing and the proposed new fencing, and a detail of the design and materials using either one of the Town's approved standard fence details or engineered drawings.
How tall can my fence be in Queen Creek, AZ?: Up to 6' in the rear yard.
How much does a Queen Creek, AZ fence permit cost?: We have Queen Creek, AZ's fence ordinance on file but not a permit fee, so we do not publish an amount for it. Ask the building department what a fence permit costs before you apply.
What does a fence plot plan need to show?: Your property outline, location of the proposed fence, total linear feet, height, material, distance from any street/sidewalk, and (in most cities) the location of your house. Fence Plotter generates this automatically from a satellite image and your fence drawing.
Can I draw my plot plan myself?: Yes — most building departments accept owner-drawn plot plans as long as they're clear, dimensioned, and to scale. Fence Plotter produces a permit-ready plot plan + elevation sketch in two minutes.

Not sure what Queen Creek means by “site plan”? See the nine things a plan reviewer checks — the same list whatever city you are applying in.

Do I need a survey?·Free template — which kind?·Do I need a permit?·Why permits get rejected

Fence Plotter is informational only. Always confirm specific requirements with the Queen Creek, AZ building department before submitting.

Ready to draw your fence? Free · 2 minutes · no sign-up

Plan a fence in Queen Creek →

Queen Creek, AZ fence permit site plan

What you'll get for Queen Creek, AZ

Queen Creek, AZ fence rules

FAQ

Other supported cities